Differences

This shows you the differences between two versions of the page.

--- wireguard_part_1 [2025/03/10 01:34] – wizardadmin
+++ wireguard_part_1 [2025/03/30 17:04] (current) – wizardadmin
@@ Line 4: / Line 4: @@
 Step 1. Go here to Download Wireguard: https://www.wireguard.com/install/
-Step 2. Once the installation is done, start Wireguard, Once it is open, at the botom left you will see "Add Tunnel" click the drop down arrow on the right of that and select "Add empty Tunnel" Name this in regards to what you want your wireguard server client to be named. note down the private and public keys. click save.
+Step 2. Once the installation is done, start Wireguard, Once it is open, at the bottom left you will see "Add Tunnel" click the drop down arrow on the right of that and select "Add empty Tunnel" Name this in regards to what you want your wireguard server client to be named. note down the private and public keys. click save.
 Step 3. Repeat step 2 and create a peer client tunnel.
@@ Line 13: / Line 13: @@
 PrivateKey = Server Private key
 ListenPort = choose a port number (default is 51820)
 Address = choose an IP address that is in the private sector and is outside of your networks IP address class use a /24 subnet
@@ Line 19: / Line 21: @@
 PublicKey = Server Public key
 AllowedIPs = Pick an IP address in the same class and subnet of the Interface address above, use a /32 ubnet
 PersistentKeepalive = 60